8 advantages of Chiu Cheung's rack
1 19'' EIA standard
With symmetrical extruded 8-foldings hollow structural frame, high tensile strength and torque resistance; static loading capacity is about 1600kg. (Test report: SDHGR120100027FT)
Strictly follow 19" EIA international standard and the tolerence should be controlled within +2.0mm, -0.0mm
2 Special rack angle arrangement
Front and rear rack angles (and horizontal members)
Rack parts are conductive and connected to the ground
3 pairs of rack angle in which the rear pair is in section to cope with different depth of equipment within one rack.
With "U" marking on both vertical rack angles and horizontal members to enhance re-positioning of rack angles and equipment installation.
Rear rack angle can be chosen either full height length or sectional type.
3 Mondernised outlook
Design is in covered door type. Door can be opened to 150º in a row and 180º in standalone.
AL "Arc" sealing strip is available as an optional decorative features。
4 Electrically isolated for safety
Baying racks are electrically isolated for safety and enhancement of ease of fault-finding.
Followed by MIL-454 standard, sharp-corner and burrs are free.
Power strips houses at the back of rack without blocking the aperture width.
Single main grounding point is provided in each rack. The whole rack is fully conductive. Plug-in type grouding wire is favorable for the disassembly and assembly of movable components like doors.
4-pointed lock avoids the door being slanted, caused by the wear-out of the door hinge when the door is opened frequently.
5 Easy for assembly
Rack is in "knock-down" type which is easy for assembly.
Different types of door are avaible for different use.
6 Convenient cable managment
Suggested cable managment (front)
Suggested cable management (rear)
Cables can go through racks when baying。
Method 1
Method 2
Flexible cable management is highly considered. Special design cable tray is available to suit for different cable management practice.
4 slot-in removable covers are equipped on the top and bottom cover to prevent dust-entry in different cable inlet volume.
Cable hole is available for max. 1200 pieces of Φ6mm cable.
7 Strong static loading capacity
Strong static loading capacity
8 Dual heat dissipation design
Fan guard with 4 ventilation fans are equipped on the top.Perforation rate for door is about 70%.
Fan box and ventilation panel can be added for enhancing heat dissipation.
Fan box
